Ford Small Block Compatible 302 c.i. Engine – 365 Horsepower – Long Block Bronco Edition
$6,649.00
Your BluePrint engine was dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. Part Number: BP350CTFD Fuel Delivery Type: Fuel Injected Spark Plug: BPP7938 NGK 7938 BKR5E (.750 inch reach, 14mm thread, 5/8 hex, plug) Spark Plug Gap: .035″ Harmonic Balancer: Recommend BPP350 – Non Weighted, 8″ diameter Flexplate/Flywheel: Recommend Late 350 Weighted Stall Converter: Stock Intake Manifold: Dual plane, aluminum BPP350VINT Fuel Recommendation: 87 Octane Timing (Initial/Total Advance): Initial timing – 10-16° and Total timing 32° Firing Order: 1,8,4,3,6,5,7,2 Recommended Break in Oil : BPP710 (Click Here) Recommended Service Oil : BPP10W30 (Click Here) Recommended Oil Filter ; BPP51061 (Click Here) Total Oil capacity with production oil pan, and Correct BPP51061 Filter : 5 Quarts Header Partners: Click here for our Header Partners and recommendations. Click here to download a copy of the Installation Guide that came with your BluePrint engine.
Description:
- Horsepower & Torque: 341 Horsepower / 371 FT LBS
- Compression Ratio: 9:1
- Aluminum Heads
- Hydraulic Roller Cam
- Cast Steel Crankshaft
- Hypereutectic Pistons
Block:
- NEW BluePrint Cast Iron Block
- Manufactured and Machined in the USA!
- 4-Bolt Main
- 4.000″ Bore
- 1-Piece Rear Main Seal
- Mech Fuel Pump Provision: Yes
- Passenger Side Dipstick
- Drilled and Tapped for Clutch Linkage
Rotating Assembly:
- Steel Crankshaft
- 3.480″ Stroke
- Forged 5.700″ Connecting Rods
- Hypereutectic Pistons
- Internal Front / External Rear Engine Balance
Cylinder Heads:
- BluePrint Aluminum Cylinder Heads – H8002K
- 64cc Chamber
- 2.02″ Intake / 1.60″ Exhaust Valves
- 195cc Intake / 75cc Exhaust Runners
Cam Specs:
- Cam Type: Roller
- .477 Intake / .471 Exhaust
- 202 Intake / 212 Exhaust Duration
- @ .050-115 Degree Lobe Separation
Ignition Timing:
- 32 Degrees Total at 3500 RPM
Also Includes:
- Valve Covers
- Oil Pan
- Timing Cover
- Harmonic Balancer
- Standard Rotation Long Water Pump
- Thermostat and Thermostat Housing
- Water Neck
- Aluminum Intake
- HEI Distributor
- Spark Plugs and Wires
- Holley Sniper 2 EFI System
Notes:
- This engine is an excellent cruiser and daily driver engine. This engine makes up to 18 inches of vacuum, and is designed to work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel
- The performance aluminum cylinder heads on this engine feature a .500 raised port vs OEM.
| Brand | |
|---|---|
| Availability | In Stock |
| HP | 341 HP / 371 FT. LBS |
| Pistons | Hypereutectic |
| Compression Ratio | 9:1 |
Related products
Chevy Corvette C6 (2005-2013)
MSD Atomic AirForce Intake Manifold (Gray Logo) – GM LS7 Engines – 27014
GM Truck & SUV
Chevy Camaro (2016+)
Texas Speed & Performance Camshaft Package- 6.2L LT1/LT4/L86 – 25-LT1CAMPKG
Chevy Camaro (2010-2015)
Chevy Corvette C7 (2014+)
MSD Atomic AirForce Intake Manifold Red Logo – GM LT1 Engines – 2700
