GM Small Block Compatible 383 c.i. Engine - 436 Horsepower - Deluxe Dressed - Carbureted

Ford Small Block Compatible 302 c.i. Engine – 361 Horsepower – Base Dressed – Rear Sump – Carbureted

Name: Buy Ford Small Block Compatible 302 c.i. Engine - 361 Horsepower - Base Dressed - Rear Sump - Carbureted online - Cars Auto Parts LLC
SKU: BP302RCTC
Price: 6299.00 USD
Availability: InStock

$6,299.00

Your BluePrint engine was dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. Part Number: MBP3550CT Fuel Delivery Type: Carbureted, 600 cfm *Not Included* Spark Plug: Champion 13 Spark Plug Gap: .045″ Harmonic Balancer: No Flexplate/Flywheel: No Stall Converter: N/A Intake Manifold: Marine, cast iron Fuel Recommendation: 91 Octane Timing (Initial/Total Advance): Initial timing – 10-16° and Total timing 32-34° Firing Order: 1,8,4,3,6,5,7,2 Notes: Recommended break in oil for your BluePrint Crate Engine: BPP710, Not for EGR Header Partners: Click here for our Header Partners and recommendations. Click here to download a copy of the Installation Guide that came with your BluePrint engine.

SKU: BP302RCTC Category: Engine Tag: Engine

Description
Additional information

Description:

Horsepower & Torque: 350 Horsepower / 400 FT LBS
Compression Ratio: 9.5:1
Cast Iron Heads
Flat Tappet Cam
Cast Steel Crank
Hypereutectic Pistons

Block:

New BluePrint Cast Iron Block
Square and Parallel Decked
Align Honed Main Bearing Bore
Cylinders Honed on Computer-Controlled Machine to Within .0002 Straightness and Roundness
Cylinders are Sonic Tested for Thickness
4-Bolt Main
4.000″ Bore
1-Piece Rear Main Seal
Mech Fuel Pump Provision: Yes
Passenger Side Dipstick Drilled and Tapped for Clutch Linkage

Rotating Assembly:

Cast Steel Crankshaft
3.480″ Stroke
OEM Type 5.700″ Connecting Rods
Hypereutectic Pistons
Internal Front/ External Rear Engine Balance

Cylinder Heads:

Vortec Cast Iron Cylinder Heads
1.94 Intake Valves
1.50 Exhaust Valves
Hardened Push Rods
Long Slot Rockers with Positive Lock Adjusting Nuts

Cam Specs:

Cam Type: Flat Tappet
.480 Intake / .489 Exhaust Lift
226 Intake / 236 Exhaust Duration
@.050-112° Lobe Separation Angle

Ignition Timing:

34 Degrees Total at 3500 RPM

Also Includes:

New Cast Iron Marine Intake
Valve Covers
Oil Pan

Notes:

This engine is designed for CARBURETED use only. It is NOT for use in any factory fuel injected applications.
Replaces Standard Rotation engines only. Not available as reverse rotation.
BluePrint Engines recommends the use of a flame arrestor in marine applications and advises checking local laws to ensure compliance with the United States Coast Guard Requirements for Ignition Protection & Fire Resistance.