Summit Racing™ Pro LS Camshaft & Spring Kits SUM-8709-1DS

Overview

Brand:
Summit Racing
Manufacturer’s Part Number:
SUM-8709-1DS
Part Type:
Camshaft Kits
Summit Racing Part Number:
SUM-8709-1DS
Cam Style:
Hydraulic roller tappet
Basic Operating RPM Range:
3,500-7,200
Camshaft Use:
Racing
Camshaft Manufacturers Description:
The Summit Stage 4 LS cam is the ultimate street/strip with the factory intake manifold design. Strong lope and it uses state-of-the-art lobe designs to pull strongly past 7000 rpm. Check piston to valve clearance and degree if necessary.
Intake Duration at 050 inch Lift:
237
Exhaust Duration at 050 inch Lift:
246
Duration at 050 inch Lift:
237 int./246 exh.
Advertised Intake Duration:
288
Advertised Exhaust Duration:
296
Advertised Duration:
288 int./296 exh.
Intake Valve Lift with Factory Rocker Arm Ratio:
0.625 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio:
0.605 in.
Valve Lift with Factory Rocker Arm Ratio:
0.625 int./0.605 exh.
Lobe Separation (degrees):
113
Camshaft Gear Attachment:
3-bolt
Computer-Controlled Compatible:
Yes
Lifters Included:
No
Valve Springs Included:
Yes
Valve Spring Style:
High lift
Outside Diameter of Outer Spring (in.):
1.304 in.
Retainers Included:
Yes
Locks Included:
Yes
Valve Stem Seals Included:
Yes
Timing Chain and Gears Included:
No
Assembly Lubricant Included:
No
Pushrods Included:
No
Rocker Arms Included:
No
Gaskets Included:
No
Valve Springs Required:
Yes
Quantity:
Sold individually.
Notes:
Not for AFM or VVT equipped engines. Summit Pro LS cams are designed for engines swapped into pre-pollution controlled vehicles. They are not for use in registered emissions-controlled vehicles operated on public highways and roads. 3-bolt camshaft, computer tuning required.

Warranty