50 State Legal Replacement 1992-1993 – Ford Small Block Compatible 302 c.i. Engine – Long Block
$5,749.00
Your BluePrint engine was dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. Part Number: BP3505CTCD Fuel Delivery Type: 670 cfm Carburetor BPP67265 Spark Plug: BPP7938 NGK 7938 BKR5E (.750 inch reach, 14mm thread, 5/8 hex, plug) Spark Plug Gap: .035″ Harmonic Balancer: Recommend BPP350 – Non Weighted, 8″ diameter Flexplate/Flywheel: Recommend Late 350 Weighted BPP871006 Stall Converter: 2000-2400 rpm Intake Manifold: Dual plane, aluminum BPP350VINT Fuel Recommendation: 91 Octane Timing (Initial/Total Advance): Initial timing – 10-16° and Total timing 32° Firing Order: 1,8,4,3,6,5,7,2 Recommended Break in Oil : BPP710 (Click Here) Recommended Service Oil : BPP10W30 (Click Here) Recommended Oil Filter ; BPP51061 (Click Here) Total Oil capacity with production oil pan, and Correct BPP51061 Filter : 5 Quarts Header Partners: Click here for our Header Partners and recommendations. Click here to download a copy of the Installation Guide that came with your BluePrint engine.
Description:
- Horsepower & Torque: 390 Horsepower / 410 FT LBS
- Compression Ratio: 9.2:1
- Aluminum Heads
- Hydraulic Roller Cam
- Cast Steel Crankshaft
- Hypereutectic Pistons
Block:
- NEW BluePrint Cast Iron Block
- Manufactured and Machined in the USA!
- 4-Bolt Main
- 4.000″ Bore
- 1-Piece Rear Main Seal
- Mech Fuel Pump Provision: Yes
- Passenger Side Dipstick
- Drilled and Tapped for Clutch Linkage
Rotating Assembly:
- Steel Crankshaft
- 3.480″ Stroke
- Forged 5.700″ Connecting Rods
- Hypereutectic Pistons
- Internal Front/ External Rear Engine Balance
Cylinder Heads:
- BluePrint Aluminum Cylinder Heads – H8002K
- 64cc Chamber
- 2.02″ Intake / 1.60″ Exhaust Valves
- 195cc Intake / 75cc Exhaust Runners
Cam Specs:
- Cam Type: Roller
- .495 Intake / .502 Exhaust
- 220 Intake / 224 Exhaust Duration
- @ .050-114 Degree Lobe Separation
Ignition Timing:
- 32 Degrees Total at 3500 RPM
Also Includes:
- Holley Brawler 670cfm Vacuum Secondary Carburetor w/ Electric Choke
- Standard Rotation Long Style Water Pump
- Thermostat and Thermostat Housin
- Valve Covers
- Harmonic Balancer
- Spark Plugs
- Spark Plug Wires
- Water Neck
- Fuel Pump
- Oil Pan
- Timing Cover
- Aluminum Intake
- HEI Distributor
Notes:
- The performance aluminum cylinder heads on this engine feature a .500 raised port vs OEM.
| Brand | |
|---|---|
| Availability | In Stock |
| HP | 390 HP / 410 FT. LBS |
| Pistons | Hypereutectic |
| Compression Ratio | 9.2:1 |
Related products
Chevy Corvette C7 (2014+)
MSD Atomic AirForce Intake Manifold Red Logo – GM LT1 Engines – 2700
Chevy Corvette C7 (2014+)
MSD Atomic AirForce Intake Manifold Gray Logo- GM LT1 Engines – 27004
Chevy Camaro (2016+)
Texas Speed & Performance Camshaft Package- 6.2L LT1/LT4/L86 – 25-LT1CAMPKG
