Chrysler Small Block Compatible 408 c.i. Engine – 375 Horsepower – Long Block
$7,049.00
Your BluePrint engine was dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. Part Number: BP3505CTFD Fuel Delivery Type: Fuel Injected Spark Plug: BPP7938 NGK 7938 BKR5E (.750 inch reach, 14mm thread, 5/8 hex, plug) Spark Plug Gap: .035″ Harmonic Balancer: Recommend BPP350 – Non Weighted, 8″ diameter Flexplate/Flywheel: Recommend Late 350 Weighted Stall Converter: 2000-2400 rpm Intake Manifold: Dual plane, aluminum BPP350VINT Fuel Recommendation: 91 Octane Timing (Initial/Total Advance): Initial timing – 10-16° and Total timing 32° Firing Order: 1,8,4,3,6,5,7,2 Recommended Break in Oil : BPP710 (Click Here) Recommended Service Oil : BPP10W30 (Click Here) Recommended Oil Filter ; BPP51061 (Click Here) Total Oil capacity with production oil pan, and Correct BPP51061 Filter : 5 Quarts Header Partners: Click here for our Header Partners and recommendations. Click here to download a copy of the Installation Guide that came with your BluePrint engine.
Description:
- Horsepower & Torque: 390 Horsepower / 410 FT LBS
- Compression Ratio: 9.2:1
- Aluminum Heads
- Hydraulic Roller Cam
- Cast Steel Crankshaft
- Hypereutectic Pistons
Block:
- NEW BluePrint Cast Iron Block
- Manufactured and Machined in the USA!
- 4-Bolt Main
- 4.000″ Bore
- 1-Piece Rear Main Seal
- Mech Fuel Pump Provision: Yes
- Passenger Side Dipstick
- Drilled and Tapped for Clutch Linkage
Rotating Assembly:
- Steel Crankshaft
- 3.480″ Stroke
- Forged 5.700″ Connecting Rods
- Hypereutectic Pistons
- Internal Front / External Rear Engine Balance
Cylinder Heads:
- BluePrint Aluminum Cylinder Heads – H8002K
- 64cc Chamber
- 2.02″ Intake / 1.60″ Exhaust Valves
- 195cc Intake / 75cc Exhaust Runners
Cam Specs:
- Cam Type: Roller
- .495 Intake / .502 Exhaust
- 220 Intake / 224 Exhaust Duration
- @ .050-114 Degree Lobe Separation
Ignition Timing:
- 32 Degrees Total at 3500 RPM
Also Includes:
- Valve Covers
- Oil Pan
- Timing Cover
- Harmonic Balancer
- Standard Rotation Long Water Pump
- Thermostat and Thermostat Housing
- Water Neck
- Aluminum Intake
- HEI Distributor
- Spark Plugs and Wires
- Holley Sniper 2 EFI System
Notes:
- The performance aluminum cylinder heads on this engine feature a .500 raised port vs OEM.
| Brand | |
|---|---|
| Availability | In Stock |
| HP | 390 HP / 410 FT. LBS |
| Pistons | Hypereutectic |
| Compression Ratio | 9.2:1 |
Related products
Chevy Corvette C7 (2014+)
MSD Atomic AirForce Intake Manifold Black Logo- GM LT1 Engines – 27003
Chevy Corvette C6 (2005-2013)
MSD Atomic AirForce Intake Manifold (Red Logo) – GM LS1, LS6, and LS2 Engines – 2702
Chevy Camaro (2010-2015)
Chevy Corvette C7 (2014+)
MSD Atomic AirForce Intake Manifold Gray Logo- GM LT1 Engines – 27004