Ford Small Block Compatible 302 c.i. Engine - 361 Horsepower - Base Dressed - Carbureted

GM Small Block Compatible 350 c.i. Engine – 341 Horsepower – Base Dressed – Fuel Injected

Name: Buy GM Small Block Compatible 350 c.i. Engine - 341 Horsepower - Base Dressed - Fuel Injected online - Cars Auto Parts LLC
SKU: BP350CTF
Price: 6249.00 USD
Availability: InStock

$6,249.00

Your BluePrint engine was dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. Part Number: BP38318CT1 Fuel Delivery Type: Carbureted Spark Plug: BPP7938 NGK 7938 BKR5E (.750 inch reach, 14mm thread, 5/8 hex, plug) Spark Plug Gap: .035″ Harmonic Balancer: BPP400L – 400 ci weighed, 8″ diameter Flexplate/Flywheel: Late 350 Weighted Stall Converter: 2000-2400 rpm Intake Manifold: N/A Fuel Recommendation: 91 Octane Timing (Initial/Total Advance): Initial timing – 10-16° and Total timing 32-34° Firing Order: 1,8,4,3,6,5,7,2 Recommended Break in Oil : BPP710 (Click Here) Recommended Service Oil : BPP10W30 (Click Here) Recommended Oil Filter ; BPP51061 (Click Here) Total Oil capacity with production oil pan, and Correct BPP51061 Filter : 5 Quarts Header Partners: Click here for our Header Partners and recommendations. Click here to download a copy of the Installation Guide that came with your BluePrint engine.

SKU: BP350CTF Category: Engine Tag: Engine

Description
Additional information

Description:

This engine is designed and manufactured to factory specs for the specified vehicles below. It’s manufactured using tighter machining tolerances, higher quality components, and finer balancing of the rotating assembly to make this engine better than the original while still meeting the description of a “replacement” engine.

View the Application List HERE

Block:

NEW BluePrint Cast Iron Block
4-Bolt Main
4.000″ Bore
1-Piece Rear Main Seal

Rotating Assembly:

Ford, Machined and Balanced by BluePrint Engines
3.000″ Stroke
OEM Type 5.090″ Connecting Rods
OEM Spec Pistons
50 oz Externally balanced Front and Rear

Cylinder Heads:

Iron Heads

Cam Specs:

Cam Type: Hydraulic Flat Tappet
OEM Spec Per Listed Vehicles
Firing Order: 1-5-4-2-6-3-7-8
Ignition Timing:

OEM Specifications

Also Includes:

Valve Covers

Notes:

Designed as factory replacement long block for specified vehicles and year ranges, using OEM specification parts. Customer to re-use existing intake manifold, ecu (if equipped), exhaust, fuel system etc. Modification or replacement of provided tinware, and minor accommodations such as dipstick location may be required.
Specifically designed as an OEM spec engine to meet emissions requirements of the specified vehicles, to meet the criteria of “replacement engine” in all 50 states.
MUST see attached application list above for fitment.