Ford Small Block Compatible 302 c.i. Engine - 361 Horsepower - Deluxe Dressed - Carbureted

GM Small Block Compatible 350 c.i. Engine – 341 Horsepower – Deluxe Dressed – Fuel Injected

Name: Buy GM Small Block Compatible 350 c.i. Engine - 341 Horsepower - Deluxe Dressed - Fuel Injected online - Cars Auto Parts LLC
SKU: BP350CTFD
Price: 6649.00 USD
Availability: InStock

$6,649.00

Your BluePrint engine was dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. Part Number: BP38318CTC1D Fuel Delivery Type: Carbureted, 750cfm, manual choke Spark Plug: BPP7938 NGK 7938 BKR5E (.750 inch reach, 14mm thread, 5/8 hex, plug) Spark Plug Gap: .035″ Harmonic Balancer: BPP400L – 400 ci weighed, 8″ diameter Flexplate/Flywheel: Late 350 Weighted Stall Converter: 2000-2400 rpm Intake Manifold: Dual plane, satin aluminum Fuel Recommendation: 91 Octane Timing (Initial/Total Advance): Initial timing – 10-16° and Total timing 32-34° Firing Order: 1,8,4,3,6,5,7,2 Recommended Break in Oil : BPP710 (Click Here) Recommended Service Oil : BPP10W30 (Click Here) Recommended Oil Filter ; BPP51061 (Click Here) Total Oil capacity with production oil pan, and Correct BPP51061 Filter : 5 Quarts Header Partners: Click here for our Header Partners and recommendations. Click here to download a copy of the Installation Guide that came with your BluePrint engine.

SKU: BP350CTFD Category: Engine Tag: Engine

Description
Additional information

Description:

Horsepower and Torque: 436 Horsepower / 443 FT LBS
Compression Ratio: 10.0:1
Aluminum Heads
Hydraulic Roller Cam
Cast Steel Crank
Hypereutectic Pistons

Block:

NEW BluePrint Cast Iron Block
Manufactured and Machined in the USA!
4-Bolt Main
4.000″ Bore
1-Piece Rear Main Seal
Mech Fuel Pump Provision: Yes
Passenger Side Dipstick
Drilled and Tapped for Clutch Linkage

Rotating Assembly:

New BluePrint Cast Steel Crankshaft
3.750″ Stroke
OEM Type 5.700″ Connecting Rods w/ 150,000 PSI Bolts
Hypereutectic Pistons
External Front / External Rear Engine Balance

Cylinder Heads:

BluePrint Aluminum Cylinder Heads – H8002K
64cc Chamber
2.02″ Intake / 1.60″ Exhaust Valves
195cc Intake / 75cc Exhaust Runners

Cam Specs:

Cam Type: Roller
.544 Intake / .555 Exhaust
230 Intake / 236 Exhaust Duration
@ .050-110 Degree Lobe Separation

Ignition Timing:

34 Degrees Total at 3500 RPM

Also Includes:

Holley Classic 750cfm Vacuum Secondary Carburetor w/ Manual Choke
Aluminum Intake Manifold *Will not clear a stock Corvette hood. Please call for special build options.
Standard Rotation Long Style Water Pump
Thermostat and Thermostat Housing
Valve Covers
Harmonic Balancer
Spark Plugs
Spark Plug Wires
Fuel Pump
Oil Pan
Timing Cover
HEI Distributor

Notes:

Not for use in pollution-controlled vehicles.
This engine features a true 4-inch bore, which mathematically yields 377 CID with a 3.75-inch stroke.
The performance aluminum cylinder heads on this engine feature a .500 raised port vs OEM.