GM Small Block Compatible 350 c.i. Engine – 341 Horsepower – Deluxe Dressed – Fuel Injected
$6,649.00
Your BluePrint engine was dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. Part Number: BP38350CT1 Fuel Delivery Type: Factory Fuel Injection from 1996 – 2000 Chevrolet Trucks and SUV’s required for emission compliance Spark Plug: BPP7938 NGK 7938 BKR5E (.750 inch reach, 14mm thread, 5/8 hex, plug) Spark Plug Gap: .035″ Harmonic Balancer: BPP400L – 400 ci weighed, 8″ diameter Flexplate/Flywheel: Late 350 Weighted Stall Converter: Stock rpm Intake Manifold: OEM Vortec Fuel Recommendation: 91 Octane Timing (Initial/Total Advance): Factory ECU Ignition timing Firing Order: 1,8,4,3,6,5,7,2 Recommended Break in Oil : BPP710 (Click Here) Recommended Service Oil : BPP10W30 (Click Here) Recommended Oil Filter ; BPP51061 (Click Here) Total Oil capacity with production oil pan, and Correct BPP51061 Filter : 5 Quarts Header Partners: Click here for our Header Partners and recommendations. Click here to download a copy of the Installation Guide that came with your BluePrint engine.
Description:
- Horsepower & Torque: 361 Horsepower / 334 FT LBS
- Compression Ratio: 9.4:1
- Aluminum Heads
- Hydraulic Roller Cam
- Cast Steel Crank
- Hypereutectic Pistons
Block:
- NEW BluePrint Engines’ High Strength Cast Iron Block
- Increased Deck Thickness and Strength Webbing
- Priority Main Oiling
- 4.000″ Bore
- 4-Bolt Main
- 1-Piece Rear Main Seal
- Improved Water Jacket Design
Rotating Assembly:
- 3.000″ Stroke
- OEM Type 5.090″ Connecting Rods
- Hypereutectic Pistons
- 50oz Externally Balanced Front and Rear
Cylinder Heads:
- BluePrint Aluminum Cylinder Heads -HP9008
- 60cc Chamber
- 2.02″ Intake / 1.60″ Exhaust Valves
- 190cc Intake / 60cc Exhaust Runners
Cam Specs:
- Hydraulic Roller Cam
- .533 Intake / .544 Exhaust Lift
- 215 Intake / 220 Exhaust Duration
- @.050–114 Degree Lobe Separation
Ignition Timing:
- 10-16 Degrees Initial, 32-34 Total
Also Includes:
- Holley Street Warrior 600cfm Vacuum Secondary Carburetor w/ Electric Choke
- Rear Sump Oil Pan
- Intake Manifold
- Distributor
- Harmonic Balancer
- Valve Covers
- Timing Cover
Notes:
- Engine timing cover is designed for standard rotation water pump and pulley kit ONLY.
- This engine is an excellent cruiser and daily driver engine. This engine makes up to 16 inches of vacuum, and is designed to work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel
| Brand | |
|---|---|
| Availability | In Stock |
| HP | 361 HP / 334 FT. LBS. |
| Pistons | Hypereutectic |
| Compression Ratio | 9.4:1 |
Related products
Chevy Corvette C7 (2014+)
MSD Atomic AirForce Intake Manifold Gray Logo- GM LT1 Engines – 27004
Uncategorized
Chevy Corvette C7 (2014+)
MSD Atomic AirForce Intake Manifold Black Logo- GM LT1 Engines – 27003
Chevy Corvette C6 (2005-2013)
MSD Atomic AirForce Intake Manifold (Red Logo) – GM LS7 Engines – 2701
GM Truck & SUV
