GM Small Block Compatible 350 c.i. Engine - 341 Horsepower - Deluxe Dressed - Fuel Injected

GM Small Block Compatible 383 c.i. Engine – 410 Horsepower – Base Dressed – Carbureted

Name: Buy GM Small Block Compatible 383 c.i. Engine - 410 Horsepower - Base Dressed - Carbureted online - Cars Auto Parts LLC
SKU: BP38315CTC1
Price: 6399.00 USD
Availability: InStock

$6,399.00

Your BluePrint engine was dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. Part Number: BP38318CT1 Fuel Delivery Type: Carbureted Spark Plug: BPP7938 NGK 7938 BKR5E (.750 inch reach, 14mm thread, 5/8 hex, plug) Spark Plug Gap: .035″ Harmonic Balancer: BPP400L – 400 ci weighed, 8″ diameter Flexplate/Flywheel: Late 350 Weighted Stall Converter: 2000-2400 rpm Intake Manifold: N/A Fuel Recommendation: 91 Octane Timing (Initial/Total Advance): Initial timing – 10-16° and Total timing 32-34° Firing Order: 1,8,4,3,6,5,7,2 Recommended Break in Oil : BPP710 (Click Here) Recommended Service Oil : BPP10W30 (Click Here) Recommended Oil Filter ; BPP51061 (Click Here) Total Oil capacity with production oil pan, and Correct BPP51061 Filter : 5 Quarts Header Partners: Click here for our Header Partners and recommendations. Click here to download a copy of the Installation Guide that came with your BluePrint engine.

SKU: BP38315CTC1 Category: Engine Tag: Engine

Description
Additional information

Description:

Horsepower & Torque: 341 Horsepower / 371 FT LBS
Compression Ratio: 9:1
Aluminum Heads
Hydraulic Roller Cam
Cast Steel Crankshaft
Hypereutectic Pistons

Block:

NEW BluePrint Cast Iron Block
Manufactured and Machined in the USA!
4-Bolt Main
4.000″ Bore
1-Piece Rear Main Seal
Mech Fuel Pump Provision: Yes
Passenger Side Dipstick
Drilled and Tapped for Clutch Linkage

Rotating Assembly:

Steel Crankshaft
3.480″ Stroke
Forged 5.700″ Connecting Rods
Hypereutectic Pistons
Internal Front / External Rear Engine Balance

Cylinder Heads:

BluePrint Aluminum Cylinder Heads – H8002K
64cc Chamber
2.02″ Intake / 1.60″ Exhaust Valves
195cc Intake / 75cc Exhaust Runners

Cam Specs:

Cam Type: Roller
.477 Intake / .471 Exhaust Lift
202 Intake / 212 Exhaust Duration
@ .050-115 Degree Lobe Separation

Ignition Timing:

32 Degrees Total at 3500 RPM

Also Includes:

Valve Covers
Oil Pan
Timing Cover
Aluminum Intake
HEI Distributor
Holley Sniper 2 EFI System

Notes:

This engine is an excellent cruiser and daily driver engine. This engine makes up to 18 inches of vacuum, and is designed to work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel
The performance aluminum cylinder heads on this engine feature a .500 raised port vs OEM.