GM Small Block Compatible 383 c.i. Engine - 436 Horsepower - Deluxe Dressed - Carbureted

GM Small Block Compatible 383 c.i. Engine – 436 Horsepower – Deluxe Dressed – Carbureted

Name: Buy GM Small Block Compatible 383 c.i. Engine - 436 Horsepower - Deluxe Dressed - Carbureted online - Cars Auto Parts LLC
SKU: BP38318CTC1D
Price: 6499.00 USD
Availability: InStock

$6,499.00

Your BluePrint engine was dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. Part Number: BP302RCTC Fuel Delivery Type: Carbureted, 600cfm Spark Plug: BPP7938 NGK 7938 BKR5E (.750 inch reach, 14mm thread, 5/8 hex, plug) Spark Plug Gap: .035″ Harmonic Balancer: BPP50 – 50 Ounce, 6.4″ Diameter Flexplate/Flywheel: 50 Ounce Weighted Stall Converter: OEM-1800 rpm Intake Manifold: Dual plane Fuel Recommendation: 87 Octane Timing (Initial/Total Advance): Initial timing – 10-16° and Total timing 32-34° Firing Order: 1,3,7,2,6,5,4,8 Notes: Not for EGR – Engine requires a V-belt standard rotation water pump and belt system. Recommended Break in Oil : BPP710 (Click Here) Recommended Service Oil : BPP10W30 (Click Here) Recommended Oil Filter ; BPP51515 (Click Here) Total Oil capacity with production oil pan, and Correct BPP51515 Filter : 5 Quarts Header Partners: Click here for our Header Partners and recommendations. Click here to download a copy of the Installation Guide that came with your BluePrint engine.

SKU: BP38318CTC1D Category: Engine Tag: Engine

Description
Additional information

Description:

49 State Legal
Built with Small Block Chevy Engine Kit Part number BPP38350RA, California Executive Order# D-824-1
+47 Rear Wheel Horsepower Increase over Factory
+ 55 Rear Wheel ft/lbs Torque Increase over Factory
Compression Ratio: 10:1
Aluminum Heads
Hydraulic Roller Cam
Cast Steel Crank
Hypereutectic Pistons

Block:

NEW BluePrint Cast Iron Block
Manufactured and Machined in the USA!
4-Bolt Main
4.000″ Bore
1-Piece Rear Main Seal
Mech Fuel Pump Provision: Yes
Passenger Side Dipstick
Drilled and Tapped for Clutch Linkage

Rotating Assembly:

New BluePrint Steel Crankshaft
3.750″ Stroke
OEM Type 5.700″ Connecting Rods w/ 150,000 PSI Bolts
Hypereutectic Pistons
External Front / External Rear Engine Balanced

Cylinder Heads:

BluePrint Aluminum Cylinder Heads – H8002K
64cc Chamber
2.02″ Intake / 1.60″ Exhaust Valves
195cc Intake / 75cc Exhaust Runners

Cam Specs:

Cam Type: Roller
.477 Intake / .471 Exhaust
202 Intake / 212 Exhaust Duration
@ .050-115 Degree Lobe Separation

Ignition Timing:

Computer-Controlled

Also Includes:

Valve Covers
Oil Pan
Timing Cover

Notes:

This 383 stroker is designed for use in 1996 – 2000 Chevrolet Pickup or SUV that was originally equipped with a 350ci (5.7L) engine.
No ECU tuning or recalibration is required.
Advertised horsepower gains were achieved on chassis dyno, w/ factory EFI and ECU, in a Vortec equipped, otherwise factory, GM truck.
We have taken our BluePrint OEM style Block and assembled the Small Block Chevy Kit to give you a 24% increase of 49 state legal horsepower, when installed in a GM pickup or SUV year 2000 or older model year that came with a California certified Gen 1 naturally aspirated 5.7 gasoline engine block.
This engine may require modification to existing front accessory drive mounting brackets if retaining oem front accessory drive.
Note: This engine kit has a California Air Resources Board (C.A.R.B.) Executive Order (E.O.) number: D-824-1.

Yellow Exclamation Triangle WARNING: Cancer and Reproductive Harm-
www.P65Warnings.ca.gov