Chevrolet Performance LS3 495 HP Long Block Crate Engines 19432424

Overview

Brand:
Chevrolet Performance
Manufacturer’s Part Number:
19432424
Part Type:
Crate Engines
Product Line:
Chevrolet Performance LS3 495 HP Long Block Crate Engines
Summit Racing Part Number:
NAL-19432424
Crate Engine Family:
Chevy LS
Actual Engine Displacement:
6.2L/376
Crate Engine Cylinder Head Material:
Aluminum
Engine Block Material:
Aluminum
Advertised Compression Ratio:
10.7:1
Assembled:
Yes
Engine Balance:
Internal
Cam Style:
Hydraulic roller tappet
Rear Main Seal Style:
1-piece
Intake Manifold Included:
No
Cylinder Heads Included:
Yes
Carburetor Included:
No
Throttle Body Included:
No
Distributor Included:
No
Oil Pan Included:
Yes
Valve Covers Included:
Yes
Timing Cover Included:
Yes
Water Pump Included:
No
Harmonic Balancer Included:
Yes
Flexplate Included:
No
Flywheel Included:
No
Air Cleaner Included:
No
Spark Plugs Included:
No
Spark Plug Wires Included:
No
Computer Included:
No
Wiring Harness Included:
No
Supercharger Included:
No
Quantity:
Sold individually.

Chevrolet Performance LS3 495 HP Long Block Crate Engines

Chevrolet Performance LS3 495 hp long block crate engines feature an impressive 495 hp at 5,570 rpm with 475 lbs.-ft. of torque. The assemblies use a production bottom-end and the race-tested LS “Hot” cam. With significantly more duration than the stock camshaft, the valves remain open longer, allowing these engines to pull in increased amounts of clean air through the large rectangular ports. Front-end accessories, exhaust manifolds, and flywheel or flexplate must be obtained separately, along with the engine controller kit.

Specifications include:

* Compression ratio of 10.7:1
* Recommended fuel is 92 octane
* Cast aluminum block with 6-bolt cross-bolted main caps
* Nodular iron crankshaft
* Powdered metal connecting rods
* Hypereutectic aluminum pistons
* Steel hydraulic roller tappet camshaft
* Valve lift of 0.525 in. for intake and exhaust
* Duration at 0.050 in. is 219 degrees intake and 228 degrees exhaust
* Lobe separation angle is 112 degrees
* Combustion chamber volume is 68cc
* Valve diameter is 2.165 in. for the intake and 1.590 in. for exhaust
* Cast roller trunnion rocker arms with a 1.7:1 ratio
* Internally balanced
* 58x Gen IV reluctor wheel
* Maximum recommended rpm is 6,600
* Recommended torque converter stall is 2,400-2,800

Engine includes:

* Fully assembled long block
* Oil pump, pick-up and oil pan
* Harmonic balancer
* Front timing cover
* Aluminum water pump
* Oil filter and passenger side oil dipstick and tube

Warranty