COMP Cams Magnum Hydraulic Cam and Lifter Kits CL11-213-3

Overview

Brand:
COMP Cams
Manufacturer’s Part Number:
CL11-213-3
Part Type:
Camshaft Kits
Product Line:
COMP Cams Magnum Hydraulic Cam and Lifter Kits
Summit Racing Part Number:
CCA-CL11-213-3
UPC:
036584450139
Cam Style:
Hydraulic flat tappet
Basic Operating RPM Range:
2,500-6,500
Camshaft Use:
Street/Strip
Camshaft Manufacturers Description:
Street/Strip applications. 10:1+ compression, 3000+ stall or 4 speed. 4.10 or lower gears & aftermarket intake. Very Rough Idle
Intake Duration at 050 inch Lift:
244
Exhaust Duration at 050 inch Lift:
244
Duration at 050 inch Lift:
244 int./244 exh.
Advertised Intake Duration:
292
Advertised Exhaust Duration:
292
Advertised Duration:
292 int./292 exh.
Intake Valve Lift with Factory Rocker Arm Ratio:
0.550 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio:
0.550 in.
Valve Lift with Factory Rocker Arm Ratio:
0.550 int./0.550 exh.
Lobe Separation (degrees):
110
Camshaft Gear Attachment:
3-bolt
Grind Number:
CB 292H-10
Computer-Controlled Compatible:
No
Lifters Included:
Yes
Lifter Style:
Hydraulic flat tappet
Valve Springs Included:
No
Retainers Included:
No
Locks Included:
No
Valve Stem Seals Included:
No
Timing Chain and Gears Included:
No
Assembly Lubricant Included:
Yes
Pushrods Included:
No
Rocker Arms Included:
No
Gaskets Included:
No
Valve Springs Required:
Yes
Quantity:
Sold as a kit.

COMP Cams Magnum Hydraulic Cam and Lifter Kits

Designed for hot street/strip cars, COMP Cams Magnum Series cam and lifter kits require a higher compression ratio, rear-end gear ratio, and stall torque converter than stock. With a very aggressive profile, these Magnum hydraulic cam and lifter kits provide maximum top-end performance for your high performance car.

Warranty