Eagle FSI I-Beam Connecting Rods FSI6125O

Overview

Brand:
Eagle Specialty Products
Manufacturer’s Part Number:
FSI6125O
Part Type:
Connecting Rods
Product Line:
Eagle FSI I-Beam Connecting Rods
Summit Racing Part Number:
ESP-FSI6125O
UPC:
00793348067858
Connecting Rod Length Center to Center (in.):
6.125 in.
Connecting Rod Beam Style:
I-beam
Connecting Rod Material:
Forged 4340 steel
Wrist Pin Style:
Floating
Rod Journal Diameter (in.):
2.100 in.
Big End Bore Diameter (in.):
2.2250
Quantity:
Sold as a set of 8.
Cap Retention Style:
Cap screw
Big End Width (in.):
0.940 in.
Pin End Bore Diameter:
0.927 in.
Pin End Width (in.):
1.000 in.
Clearanced for Stroker:
Yes
Connecting Rod Bolt Brand:
ARP
Connecting Rod Bolt Diameter:
7/16 in.
Connecting Rod Bolt Material:
8740 chromoly steel
Fastener Tensile Strength (psi):
180,000 psi
Connecting Rod Bolt Head Style:
12-point
Approximate Connecting Rod Weight (g):
605
Advertised Horsepower Rating:
800 hp
Advertised RPM Rating:
8,000 rpm
Weight Matched Set:
Yes
Remanufactured:
No
Magnafluxed:
Yes
Connecting Rod Color:
Shot-peened
Notes:
Block may need clearanced.

Eagle FSI I-Beam Connecting Rods

Eagle FSI I-beam connecting rods are forged strong from 4340 steel. They are fitted with 7/16 in. ARP 8740 cap screw-style rod bolts, alignment sleeves for precise cap location, and silicone bronze pin bushings. Sizing is performed using the Sunnen Kross grinding system and is weight-matched to +/- 1 gram. Get your modified pump-gas racing engines cranking with FSI I-beam connecting rods from Eagle.

Warranty