FLOTEK 185cc Small Block Ford Thumper Cylinder Heads 185-505

Overview

Brand:
Flotek
Manufacturer’s Part Number:
185-505
Part Type:
Cylinder Heads
Product Line:
FLOTEK 185cc Small Block Ford Thumper Cylinder Heads
Summit Racing Part Number:
FLK-185-505
UPC:
850134007938
Combustion Chamber Volume (cc):
60
Intake Runner Volume (cc):
185cc
Exhaust Runner Volume (cc):
62cc
Cylinder Head Style:
Assembled
Cylinder Head Material:
Aluminum
Intake Port Shape:
Rectangular
Intake Valve Diameter (in.):
2.020 in.
CNC-Machined Combustion Chamber:
No
CNC-Machined Intake Runner:
No
CNC-Machined Exhaust Runner:
No
Intake Port Location:
Standard
Exhaust Port Shape:
Square
Exhaust Port Location:
Standard
Spark Plug Style:
Angle
Intake Valves Included:
Yes
Exhaust Valves Included:
Yes
Exhaust Valve Diameter (in.):
1.600 in.
Valve Springs Included:
Yes
Maximum Valve Lift (in.):
0.550 in.
Camshaft Style:
Hydraulic roller
Outside Diameter of Outer Spring (in.):
1.460 in.
Damper Spring Included:
Yes
Number of Springs Per Valve:
Single
Retainers Included:
Yes
Retainer Material:
Chromoly steel
Locks Included:
Yes
Lock Style:
7 degree
Valve Stem Seals Included:
Yes
Valve Stem Seal Style:
Positive stop
Rocker Arm Studs Included:
Yes
Rocker Arm Nut Thread Size:
3/8 in.-24
Rocker Arms Included:
No
Rocker Arm Nuts Included:
No
Guideplates Included:
Yes
Guideplate Pushrod Size:
5/16 in.
Valve Cover Mounting Style:
Perimeter bolt
Accessory Bolt Holes Drilled:
Yes
Intake Valve Angle:
20
Exhaust Valve Angle:
20
Valve Guides Included:
Yes
Valve Guide Material:
Manganese bronze
Valve Seats Machined:
Yes
Valve Seat Machine Style:
3-angle
Valve Seat Material:
Cast alloy
Cylinder Head Color:
Natural
Steam Holes Drilled:
No
Oiling Style:
Through pushrod
Machined for O-Ring:
No
Heat Crossover:
Yes
Quantity:
Sold individually.
Notes:
Thermactor plugs not included (TFS-51400265) Will not accept stock pushrods.

FLOTEK 185cc Small Block Ford Thumper Cylinder Heads

FLOTEK 185cc Small Block Ford Thumper cylinders heads feature a raised “floor” and “roof” design. Why you ask? This allows a better approach to the valve when attempting to achieve high performance and to keep air and fuel attached to short turn radius for increased torque over a wider rpm range without sacrificing high-rpm power. Coupled with the new chamber design for better wet flow quality and a “W” design exhaust port to keep flow attached to the port floor which greatly increases exhaust gas evacuation verses original 180cc design. Always thinking of the racer, the FLOTEK Thumper 180 accepts stock manifold!