Summit Racing™ Pro LS Automotive Camshafts SUM-8707R1

Brand:
Summit Racing
Manufacturer’s Part Number:
SUM-8707R1
Part Type:
Camshafts
Product Line:
Summit Racing™ Pro LS Automotive Camshafts
Summit Racing Part Number:
SUM-8707R1
UPC:
190861251441
Cam Style:
Hydraulic roller tappet
Camshaft Use:
Racing
Camshaft Manufacturers Description:
Not intended for use with VVT or AFM. The Summit Stage 2 LS cam is the biggest cam for a daily driver. It has a steady lope and tunes well with a minimum of hassle. It uses state-of-the-art cam lobe designs to pull strongly to 7000 rpm with as little as 150 lbs. of seat pressure.
Basic Operating RPM Range:
3,000-7,000
Intake Duration at 050 inch Lift:
226
Exhaust Duration at 050 inch Lift:
238
Duration at 050 inch Lift:
226 int./238 exh.
Advertised Intake Duration:
275
Advertised Exhaust Duration:
287
Advertised Duration:
275 int./287 exh.
Intake Valve Lift with Factory Rocker Arm Ratio:
0.600 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio:
0.600 in.
Valve Lift with Factory Rocker Arm Ratio:
0.600 int./0 600 exh.
Lobe Separation (degrees):
113
Camshaft Gear Attachment:
3-bolt
Computer-Controlled Compatible:
Yes
Valve Springs Required:
Yes
Quantity:
Sold individually.
Notes:
Not intended for use with VVT or AFM. The Summit Stage 2 LS cam is the biggest cam for a daily driver. It has a steady lope and tunes well with a minimum of hassle. It uses state-of-the-art cam lobe designs to pull strongly to 7000 rpm with as little as 150 lbs. of seat pressure. Camshaft features base circle of 0.720 int./0.720 exh.

Summit Racing™ Pro LS Automotive Camshafts

Summit Racing™ Pro LS Automotive cams are affordable and designed in stages with very specific cam timing for each individual application in cathedral and rectangle port versions. This ensures maximum performance and gives you the idle you are looking for. The lobes are designed for stability at high rpm with the spring pressures found in quality .600 and .670 in. spring packs. Careful design guarantees the cams can be installed with minimal difficulty. Although piston to valve clearance should always be verified, the Stage 2 and 3 cams often allow for additional cylinder head milling. The Stage 4 cams often require no changes but can be degreed slightly different as needed. Starting with American bearing steel, they are precision machined on a Landis 3LB CNC grinder with CBN diamond wheels for unmatched quality.

Warranty