Edelbrock 15664 – E-Force Supercharger R2650 17-18 Chevy/GMC Gen V Truck & SUV 6.2L

Edelbrock – 15664

E-Force Supercharger for 2014-2018 Chevy/GMC/Cadillac Truck & SUV with 6.2L V8

Edelbrock supercharger Stage 1 Street System part #15664 for 2014-2020 Silverado 1500, Sierra 1500, Escalade, Escalade ESV, Yukon Denali & Yukon Denali XL applications with a 6.2L L86 Gen V engine.

This new addition to Edelbrock’s expanding line of superchargers is highlighted by significant improvements for Chevrolet/GMC/Cadillac 2015-2020 SUVs & 2014-2018 full size trucks with the GM 6.2L L86 V8 engine. This is a bolt-on performance kit that is emissions legal in all 50 states and produces 576 horsepower with 537 ft-lbs of torque at the rear wheel. This is the perfect power adder whether you plan to tow a trailer, haul heavier loads, or you just want to feel your truck/SUV come to life without sacrificing daily drivability! The new Edelbrock supercharger Kit #15664 for Chevy/GMC/Cadillac trucks and SUVs is a complete redesign of our #1565 and #1566 kits featuring an all-new manifold that now houses Eaton’s biggest R2650 TVS rotors with 170-degree high-twist lobes, bigger bearings and beefier timing gears for unparalleled efficiency and reliability. The Edelbrock supercharger Kit for the 6.2L V8 fits under the stock hood with absolutely no cutting or modifications required. And if you’re concerned about the effect on MPG, the increase in power comes with little to no loss in fuel economy thanks to the supercharger’s integrated bypass valve that mitigates parasitic power loss during normal driving. This new kit is a true bolt-on that requires no additional modifications to the stock 6.2L engine. For those who want more power, the R2650 supercharger can support more than 1,000 horsepower at the flywheel with the right combination of parts. This Edelbrock supercharger features a self-contained lubrication system with a 100,000-mile service interval with a high-capacity Dual-Pass 3-Core (DP3C) integrated intercooler and comes finished in a durable black powder-coating that blends nicely with the engine. Each kit includes a complete set of preformed hoses, hardware and a full-color manual that provides clear step-by-step instructions for ease of installation. This system is designed and manufactured in the USA and is covered by a free 3-yeear/36,000-mile warranty.

Bolt On Installation
Boost The Power Of Your Vehicle
Maximum Low End Torque
Ideal For Towing and Off-Road Performance

Maximum Pressure Reading: 12
Hose Included: Yes
Finish: Black Powder Coated
Center Housing Cooling Type: Intercooler
Maximum Torque: 537RW
Mounting Hardware Included: Yes
Universal Or Specific Fit: Specific
Outside Pulley Diameter: 3.5
System Type: Stage 1 – Street System
Gasket Or Seal Included: Yes
Housing Material: Cast Aluminum
Rotor Type: Eaton TVS 2650
Air Filter Included: Yes
Oil Capacity: 150
Harmonic Balancer Diameter: 7.4
Calibration: Yes
Internal Step Up: Yes
Maximum Boost Pressure: 12
Pulley Belt Width: 6-Rib
Quantity: Kit
Maximum Horsepower: 526RW
CARB Executive Order Number: D-215-123
Mounting Bracket Included: Yes
RGL: WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Vehicle Model: Escalade
Vehicle Model: Escalade ESV
Vehicle Model: Sierra 1500
Vehicle Model: Silverado 1500
Vehicle Model: Yukon Denali
Vehicle Model: Yukon Denali XL