Texas Speed & Performance 6.2L LT1/LT4/L86 VVT-1 Camshaft w/32% Fuel Lobe – 25-TSPLT1VVT-1-32

**75+ FWHP Gains; 596 HP/511 TQ on engine dyno** Cam Specs:�227/231, .635″/.635″, 116 LSA The gen 5 LT1 engine utilizes Variable Valve Timing (VVT) controlled via a cam phaser. A cam phaser is a computer-controlled cam gear that automatically optimizes camshaft timing based on the current engine RPM. While this technology provides tremendous efficiency benefits, it presents a challenge when designing performance cams due to the wide range of valve timing movement and constantly changing piston-to-valve clearance. With the help of Texas Speed’s Superflow 902 engine dyno, we are able to custom-design camshafts and phaser tuning tables to allow our gen 5 LT1 customers the ability to purchase the ultimate in LT1 performance camshafts! Thanks to the Superflow 902 dyno, Texas Speed is the only company that currently offers a VVT camshaft with a phaser table included to properly tune the camshaft phaser once it’s installed in your 2014+ Corvette! The Texas Speed & Performance LT1 VVT1 camshaft is a great choice for the enthusiast looking for an additional jump in horsepower without sacrificing hardly any driveability. It will have a nice lope at idle but nothing too aggressive. It does remove the factory AFM/DOD system that deactivates cylinders, but it retains the variable valve timing (VVT) system that allows the engine to advance and retard the cam while the engine is running. This provides a much better power curve since the engine can advance the cam in the lower RPM’s for better torque and retard the cam in the upper RPM’s for better horsepower. We do recommend using our TSP .660″ dual spring kit with PAC springs & titanium retainers and TSP hardened chromoly pushrods with this camshaft. Each gen 5 LT1 camshaft Texas Speed offers will require the use of a Comp Cams Phaser limiter kit. The phaser limiter restricts the range of cam timing movement to 20�. This modification provides the necessary valve clearance for serious performance camshafts with tighter lobe separations while still utilizing the benefits of the VVT technology. We do recommend the +32% fuel lobe for any power-adder applications. �The +32% fuel lobe will require the use of a lash cap, so please make sure that you install one during the camshaft installation! �You can select the optional lash cap in the drop down menu. �WE DO NOT CHARGE EXTRA FOR OUR +32% FUEL LOBE! All of our TSP LT1 camshafts were designed on our SuperFlow 902 engine dyno using an otherwise stock 6.2L LT1 engine. We design and test many different camshafts before selecting the camshafts that we offer to our customers. This provides us with a distinct advantage of offering the best power curve possible without sacrificing overall performance, as well as knowing that what we offer is also safe and will not have any piston-to-valve clearance issues. We test our products before we sell them, so you KNOW that you are purchasing a camshaft that is proven!