GM Small Block Compatible 383 c.i. Engine - 436 Horsepower - Base Dressed - Fuel Injected

GM Small Block Compatible 383 c.i. Engine – 436 Horsepower – Base Dressed – Fuel Injected

Name: Buy GM Small Block Compatible 383 c.i. Engine - 436 Horsepower - Base Dressed - Fuel Injected online - Cars Auto Parts LLC
SKU: BP38318CTF1
Price: 7199.00 USD
Availability: InStock

$7,199.00

Your BluePrint engine was dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. Part Number: BP3479CT Fuel Delivery Type: Carbureted, 670cfm **Not Included** Spark Plug: BPP7938 NGK 7938 BKR5E (.750 inch reach, 14mm thread, 5/8 hex, plug) Spark Plug Gap: .035″ Harmonic Balancer: BPP28 – 28 Ounce, 6.4″ Diameter Flex plate/Flywheel: 28 Ounce Weighted such as BPP529618, BPPF28164, BPPF157T28 Stall Converter: 2000-2400 rm Intake Manifold: Dual plane (not included) Fuel Recommendation: 91 Octane Timing (Initial/Total Advance): Initial timing – 10-16° and Total timing 32-34° Firing Order: 1,3,7,2,6,5,4,8 Notes: Not for EGR – Engine requires a V-belt standard rotation water pump and belt system. Recommended Break in Oil : BPP710 (Click Here) Recommended Service Oil : BPP10W30 (Click Here) Recommended Oil Filter: BPP51515 (Click Here) Total Oil capacity with production oil pan, and Correct BPP51515 Filter: 5 Quarts Header Partners: Click here for our Header Partners and recommendations. Click here to download a copy of the Installation Guide that came with your BluePrint engine.

SKU: BP38318CTF1 Category: Engine Tag: Engine

Description
Additional information

Description:

Horsepower & Torque: 405 Horsepower / 450 FT LBS
Compression Ratio: 9.5:1
Cast Iron Heads
Hydraulic Roller Cam
Cast Steel Crank
Hypereutectic Pistons

Block:

New BluePrint Cast Iron Block
Square and Parallel Decked
Align Honed Main Bearing Bore
Cylinders Honed on Computer-Controlled Machine to Within .0002 Straightness and Roundness
Cylinders are Sonic Tested for Thickness
4-Bolt Main
4.000″ Bore
1-Piece Rear Main Seal
Mech Fuel Pump Provision: Yes
Passenger Side Dipstick Drilled and Tapped for Clutch Linkage

Rotating Assembly:

New Cast Steel Crankshaft
3.750″ Stroke
OEM Type 5.700″ Connecting Rods w/ 150,000 PSI Bolts
Hypereutectic Pistons
External Front/ External Rear Engine Balance

Cylinder Heads:

Vortec Cast Iron Cylinder Heads
1.94 Intake Valves
1.50 Exhaust Valves
Hardened Push Rods
Long Slot Rockers with Positive Lock Adjusting Nuts

Cam Specs:

Cam Type: Hydraulic Roller
.495 Intake / .502 Exhaust Lift
220 Intake / 224 Exhaust Duration
@.050-114 Degree Lobe Separation
Using 1.5 Rocker’s

Also Includes:

Marine Intake Manifold
Valve Covers
Oil Pan

Notes:

This engine is designed for CARBURETED use only. It is NOT for use in any factory fuel injected applications.
Replaces Standard Rotation engines only. Not available as reverse rotation.
BluePrint Engines recommends the use of a flame arrestor in marine applications and advises checking local laws to ensure compliance with the United States Coast Guard Requirements for Ignition Protection & Fire Resistance.